Most people value quick and efficient service. Their oil is changed in 15 minutes, their pizza is at their door within 30 minutes. Can the same thing be applied to painting services? Let’s find out…
What can be accomplished in a day of painting?
There are many new products coming out with shorter dry times, which allow us to complete more of your project in a shorter time. I’ll give a few examples:
Quick dry caulking: This particular product can be painted within a half hour versus over an hour with most other types of caulk.
Sheetrock 5 or EasySand 5: These are powder based patching compounds which are designed to be fast drying. In fact, as long as a patch is fairly shallow it can be sanded within an hour. This allows us to do multiple skim coats on a patch in one day. Previously the quickest drying powder was Sheetrock 20, where a skim coat would generally take a half day to dry.
Quick dry primers: Many times we’ll use quick dry primers that can be top coated within 30 min to an hour. This gives us the ability to prime and paint in the same day.
However, we transform your home with lasting beauty, and sometimes it takes a little more time to achieve a lasting result. So, what are the circumstances that would prevent painting from being done in one day?
High level of prep needed before painting.
Some painters looking to quickly finish the job will just skim over cracks in plaster, however, this is only a temporary cosmetic solution. The crack is still lurking underneath the quick fix and it generally shows through the surface again, not long after the work has been completed.
In order to properly correct these fault lines in your walls, they must be dug out and widened before a thick layer of plaster compound is put in to stabilize the crack.
Whenever a thick layer of plaster compound is applied it generally needs to be left until the next day before it is dry enough to sand.
Likewise, when dealing with deep holes or other damage we have to wait for the plaster compound to dry, which generally means leaving it to the next day.
Also, when dealing with drywall walls, damaged seams generally take over a day to fix when the dry time is factored in.
Painting in humid areas and other factors that affect drying time.
In the summer, if there is a lot of humidity in the air the paint won’t dry as quick and extra time will have to be factored in. This additional time can be reduced by running the air conditioning or a dehumidifier.
In the winter some exterior walls can be very cold, especially in older Toronto homes with poor insulation. These cold walls can greatly slow down the drying of both plaster compound and paint.
What can be done to speed drying times when painting?
Many times if plaster or paint is taking a long time to dry a painter will use a fan, heater, hair dryer or even a heat gun to speed the drying process. Whilst heat guns, that you can get from places like Pro-Tect Plastics (https://shrinkwrapcontainments.com/p-34-shrinkfast-998-ul-heat-gun-kit.aspx) can be particularly useful, ensuring that you use them properly, as well as controlling the temperature will be crucial in the success of the drying process. These techniques are fine, and we use some of these methods from time to time, but with caution. If dry time is accelerated too much what happens is that the top layer of either patch or paint dries, but underneath is still wet. The wet patch or paint will actually cause cracking and blistering in the future because the surface underneath is unstable.
So, in conclusion, CAM Painters can get a lot of painting done in a day, but there are many situations where we will need to give patching compound, primer or paint adequate time to dry so that it provides a sound, durable paint system for you, our valued client. In these situations, we prefer to do things right, rather than do things quickly.
So why don’t you book a quote? CAM Painters will Transform your home with lasting beauty!